Payment & Shipping Terms:
|Material:||100% Virgin Tungsten Carbide||Workpiece:||Steel, Cast Iron|
|Process Type:||Roughing, Semi-finishing,||Usage:||Milling Inserts|
|Color:||Yellow, Gray, Color||Application:||For Turning And Milling|
|Type:||Inserts For Face Milling|
trigon carbide inserts,
tungsten carbide inserts
Tungsten Carbide Tool Inserts , Triangle Indexable Cutting Tools WCMX050208FN
1.Carbide is more expensive per unit than other typical tool materials, and it is more brittle, making it susceptible to chipping and breaking.
2.Most modern face mills use carbide inserts,as well as many lathe tools and endmills.In recent decades,though solid-carbide endmills have also become more commonly used,wherever the application's characteristics make the pros(such as shorter cycle times)outweigh the cons(mentioned above).
Features and benefits
1. Up to 30% higher productivity and profitability.
2. Coated suface enable to get longer tool life.
3. Good abrasion resistance and toughness
1. Incorporate latest molding, coating, edge preparation,and other manufacturing technology.
2. Coatings provide highpeed capability and are engineered from finishing to hevy roughing,the ostcoat treatment reduces coating stresses,improves coating adhesion,and improves workpiece finish.
3. Application areas: Machining of cast iron, nonferrous alloy, chill cast iron, hard steel, stainless steeland other non-metallic.
|YBC151||CVD||P05-P20, finishing of P-type material|
|YBC152||CVD||P05-P20, finishing of P-type material|
|YBC251||CVD||P10-P30, semi-finishing of P-type material|
|YBC252||CVD||P10-P35, semi-finishing of P-type material|
|YBC351||CVD||P20-P40, roughing of P-type material|
|YBM151||CVD||M05-M30, finishing, semi-finishing and roughing of M-type material|
|YBM153||CVD||BEST CHOICE for Roughing of M-type material|
|YBM251||CVD||M10-M30, semi-finishing and roughing of M-type material|
|YBM253||CVD||M10-M35, semi-finishing and roughing of M-type material|
|YBD052||CVD||K05-K15, finishing of K-type material, esp. for high speed dry machining of gray cast iron|
|YBD102||CVD||K05-K20, finishing of K-type material, esp. for high speed machining of Nodular cast iron|
|YBD151||CVD||K05-K25, finishing of K-type material, semi-finishing of K-type material|
|YBD152||CVD||K05-K25, finishing and semi-finishing of K-type material|
|YBD252||CVD||K15-K35, semi-finishing and roughing of K-type material|
|YBG102||PVD||K01-K10, S10-S20, finishing of K.S-type material|
|YBG105||PVD||finishing and semi-finishing for materials difficult to cut|
|YBG202||PVD||P10-P30, M10-M30, K10-K20, S20-S30, semi-finishing of P, M, K-type material; Roughing of S-type material|
|YBG205||PVD||M05-M30, semi-finishing and roughing of M-type material|
|YBG302||PVD||P10-P40, M10-M30, K20-K40, S20-S30, semi-finishing and roughing of P.M.K.S-type material|
|YNG151||Uncoated Cermet||P05-P20, M05-M20, K05-K20, wide application in finish machining of P. M. K-type material|
|YNG151C||Coated Cermet||P01-P20, M01-M20, K01-K20, wide application in finish machining of P. M. K-type material|
|YC10||Cemented||P05-P20, finishing of P-type material|
|YC40||Cemented||P20-P40, rouging of P-type material|
|YD051||Cemented||K05-K15, finishing of K-type material|
|YD101||Cemented||N05-N30, S05-S15, finishing and semi-finishing of H-type material, finishing of S-type material|
|YD201||Cemented||K10-K35, semi-finishing and rouging of K-type material|
1. We can design and manufacture products,according to the request of customer's.
2. sample order is welcome,Free samples but pay shipping cost.
3. factory wholesales price,Lowest shiping fee for you to choose.
4. after get your inquiry, we will reply in 12 hours
5. welcome to visit our factory, we will pick you up
6. pleases feel free to ask us price list
Contact Person: Lynn