Payment & Shipping Terms:
|Material:||Tungsten Carbide||Coating:||PVD CVD|
|Color:||Gray/ Golden/ Black||Manufacture:||Yes|
|Usage:||CNC Milling Insert||Application:||Parting And Grooving Inserts|
|Processing Material:||Steel/ Stainless Steel/ Cast Iron|
top notch grooving inserts,
parting off inserts
1.Carbide is more expensive per unit than other typical tool materials, and it is more brittle, making it susceptible to chipping and breaking.
2.Most modern face mills use carbide inserts,as well as many lathe tools and endmills.In recent decades,though solid-carbide endmills have also become more commonly used,wherever the application's characteristics make the pros(such as shorter cycle times)outweigh the cons(mentioned above).
The Key products we selling as below:
--Carbide Inserts:turning inserts,threading inserts, milling inserts,grooving inserts..
--Turning Tool:external turning,boring bar turning, threading turning...
--End Mills: Carbide,, Rough End Mills, Round Tool Bits
--Milling Tool:high feedrate face mill, round dowel face mill, end mill shank..
--Drill bits:solid carbide step drills, twist drill, hss drill, indexable high speed drill
--Hand Taps&Carbide saw blade
--Rotating tool system:JT/BT/ST/HSK/DAT
Features and benefits
1.Up to 30% higher productivity and profitability.
2.Coated suface enable to get longer tool life.
3.Good abrasion resistance and toughness
1.Incorporate latest molding, coating, edge preparation,and other manufacturing technology.
2.Coatings provide highpeed capability and are engineered from finishing to hevy roughing,the ostcoat treatment reduces coating stresses,improves coating adhesion,and improves workpiece finish.
3.Application areas: Machining of cast iron, nonferrous alloy, chill cast iron, hard steel, stainless steeland other non-metallic.
|YBC151||CVD||P05-P20, finishing of P-type material|
|YBC152||CVD||P05-P20, finishing of P-type material|
|YBC251||CVD||P10-P30, semi-finishing of P-type material|
|YBC252||CVD||P10-P35, semi-finishing of P-type material|
|YBC351||CVD||P20-P40, roughing of P-type material|
|YBM151||CVD||M05-M30, finishing, semi-finishing and roughing of M-type material|
|YBM153||CVD||BEST CHOICE for Roughing of M-type material|
|YBM251||CVD||M10-M30, semi-finishing and roughing of M-type material|
|YBM253||CVD||M10-M35, semi-finishing and roughing of M-type material|
|YBD052||CVD||K05-K15, finishing of K-type material, esp. for high speed dry machining of gray cast iron|
|YBD102||CVD||K05-K20, finishing of K-type material, esp. for high speed machining of Nodular cast iron|
|YBD151||CVD||K05-K25, finishing of K-type material, semi-finishing of K-type material|
|YBD152||CVD||K05-K25, finishing and semi-finishing of K-type material|
|YBD252||CVD||K15-K35, semi-finishing and roughing of K-type material|
|YBG102||PVD||K01-K10, S10-S20, finishing of K.S-type material|
|YBG105||PVD||finishing and semi-finishing for materials difficult to cut|
|YBG202||PVD||P10-P30, M10-M30, K10-K20, S20-S30, semi-finishing of P, M, K-type material; Roughing of S-type material|
|YBG205||PVD||M05-M30, semi-finishing and roughing of M-type material|
|YBG302||PVD||P10-P40, M10-M30, K20-K40, S20-S30, semi-finishing and roughing of P.M.K.S-type material|
|YNG151||Uncoated Cermet||P05-P20, M05-M20, K05-K20, wide application in finish machining of P. M. K-type material|
|YNG151C||Coated Cermet||P01-P20, M01-M20, K01-K20, wide application in finish machining of P. M. K-type material|
|YC10||Cemented||P05-P20, finishing of P-type material|
|YC40||Cemented||P20-P40, rouging of P-type material|
|YD051||Cemented||K05-K15, finishing of K-type material|
|YD101||Cemented||N05-N30, S05-S15, finishing and semi-finishing of H-type material, finishing of S-type material|
|YD201||Cemented||K10-K35, semi-finishing and rouging of K-type material|
ADVANTAGES of SHIELD
Q1: Is your company a trading one or a factory?
Q2: How do I pay for my purchase
A2:Escrow, Credit card, , Paypal, MoneyGram,T/T, are all accepted.
Q3: How about the delivery?
A3: 1-5 days if in stock, once you paid.
Q4: Do you accept trial order?
A4: Sure we can. Free samples are provided any time.
Q5: Is the MOQ fixed?
A5: For mass orders, the MOQ can't be less than production requirements of factory. For stock items, order quantity can be negotiable.
Q6: Are customized products accepted?
A6: We can design and produce according to your request.
Contact Person: Lynn